ADV200 LC

The ADV200-LC series is used in applications that demand robustness, long life, and maximum reliability.

Liquid cooling systems of electrical and mechanical units, widely used in plastic processing equipment, significantly reduces the size of the electrical drive.

Thanks to a very robust dissipation system, the ADV200-LC series supports the already available air-cooled line and integrates with great flexibility in existing systems.

Functions:

Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp with jerks
Anti-condensation function
Motorpotentiometer function
Flying restart function
Droop function
Double motor parameters setting
PID block function (application pre-charged)
Mains loss detection managed through controlled stop and/or energy optimization
Variable switching frequency
CT an VT operating mode
Built-in humidity sensor
Management of external solenoid (if present) to control flow of cooling liquid for drive and motor
Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
Memory Keypad with 5 parameters set.

Options:
I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet, EtherCAT, Industrial Ethernet(*), ProfiNet
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Braking resistors (standardized for the whole line)
Output chokes (standardized for the whole line)
Bracket kit for mounting rear panel heat sink (standard and with IP54 protection rating)
Rapid connectors kit
Extension pipe with swivel connections.

Field-oriented vector inverter, from 30kW up to 400kW
* Mains supply: 3 x 380…480Vca, 50/60Hz
* Motor ratings from 30kW (40Hp) to  400kW (500Hp)
* Certifications: CE (UL, cUL on progress)

Features:

• Regulation control modes: FOC with Speed feedback, FOC open loop, V/F
• Max Output frequency 500Hz
• DC Choke integrated up to 200kW
• EMC Filter integrated
• Dynamic Braking Module integrated (up to 90kW)
• Optional integrated braking resistor  (up to 55kW)
• Overload according with IEC146 Class 1 and Class 2
• Heavy duty and Light duty overload management
• Up to 3 options on board
• Safety Stop card in accordance with EN 954-1 (Cat.3)
• Multilanguage programming software (5 languages)
• Advanced PLC according to the IEC61131-3 Standard
• Alphanumeric programming keypad
• 2 Bipolar Analogue Inputs (Voltage/Current/PTC-KTY input)
• 2 Bipolar Analogue Outputs (1: Voltage/Current, 1: Voltage)
• 6 Digital Inputs (PNP / NPN)
• 2 Digital Outputs (PNP / NPN)
• 2 Relay Outputs, single contact
• RS485 Serial Line (Modbus RTU protocol)
• Interfacing with the more common field bus: ProfiBus, CANopen, DeviceNet, EtherNet real.time GDNet, EtherCAT, Industrial Ethernet(*),  ProfiNet
• IP00 protection degree as standard

(*)Endüstri standartlarıyla uyumlu