Principales fonctions et panoramique


ADV200 inverter with IP54 external heatsink for push through cabinet mounting. Available also in the –EHR version with reduced fixing flange.


  • Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
  • Torque control
  • Simplified Start-up menu
  • Instantaneous Overload up to 180%
  • Motor, Drive and Braking resistor I2t thermal protection
  • Multispeed function (16 programmable preset)
  • 4 independent programmable Multi-ramp with jerks
  • Motorpotentiometer function
  • Flying restart function
  • Droop function
  • Double motor parameters setting
  • PID block function (application pre-charged)
  • Mains loss detection managed through controlled stop and/or energy optimization
  • Variable switching frequency
  • CT an VT operating mode
  • Advanced programming via MDPLC tool (IEC 61131-3 standard environment)
  • Memory Keypad with 5 parameters set


  • I/O expansion cards, configurable according to the customer's machine needs
  • Expansion cards for the management of auxiliary encoders
  • Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet, EtherCAT, Industrial Ethernet(*), Profinet
  • Safety Stop card in accordance with EN 954-1 (Cat.3) PL "e"
  • Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
  • External braking unit:
    - BUy series: inverter mains voltage 230-480Vac,  690Vac (BUy1065-6) and 575Vac (BUy-1075-5); rated current from 28 to 120 Arms; parallel-connect up to 4 units (1 master + 3 slave)
    - BU200 series: inverter mains voltage 380-480 Vdc (BU200-4) and 500-690 Vdc (BU200-6);  rated current from 198 to 424 Arms, parallel-connect up to 5 units (1 master + 4 slave)
  • Braking resistors (standardized for the whole line)
  • Output chokes (standardized for the whole line)
  • IP54 with external heatsink

(*)Compatible to industry standards


Field-oriented vector inverter from 7.5 to 132 kW with IP54 external heatsink

* Power supply:

- 3 x 380…480 Vca, 50/60 Hz

* Motor power from 7.5 kW (10 Hp) to 132 kW (175 Hp)

* Certifications: CE UL, cUL


  • 6 mechanical sizes for power range from 7.5 to 132 kW
  • DC side choke
  • Integrated EMC filter
  • For other specifications, refer to the ADV200 drive.

Téléchargements ADV200-EH

ADV200 AC Drive family, Regenerative & DC power supply units
Drive Overview, Guide to choices
General Overview
Inverter system & power supply unit
EXP-RES-I1R1-ADV, Resolver expansion card (≥ fw 6.0.4)
Waste electrical and electronic equipment (WEEE) Information
ADV200 - SI with external safety modules
ADV200, Quick Guide to writing programs with MDPlc
Application, Electrical Line Shaft 2 for ADV200 (≥ fw 7.X.7)
Application, Flying Shear for ADV200 fw 7.X.16 and higher
Application, PID for ADV200 fw 5.X.X , 6.X.X , 7.X.X
Application, Torque Winder for ADV200 fw 6.X.X , 7.X.X
BU200, Braking Unit
BUy, Braking Unit
EMC, Electromagnetic compatibility
EXP-CAN-DN-ADV, CANopen / DeviceNet interface expansion card
EXP-DE-I2R1F2-ADV, Encoder expansion card (≥ Fw 3.X.X)
EXP-ENSSI-I1R1F2-ADV, Encoder expansion card (≥ Fw 3.X.X)
EXP-ETH-CAT-ADV, EtherCAT interface expansion card
EXP-ETH-GD-ADV, GDNet interface expansion card
EXP-ETH-IP-ADV, Industrial Ethernet interface expansion card
EXP-ETH-PN-ADV200, Profinet interface card for ADV200
EXP-FL-XCAN-ADV, CAN Master Controller & FastLink interface
EXP-HIP-I1R1F2-ADV, Encoder expansion card (≥ Fw 3.X.X)
EXP-IO-D5R8-ADV, I/O Expansion card
EXP-IO-D6A4R1-ADV, I/O Expansion card
EXP-PDP-ADV, Profibus DP interface expansion card
EXP-SE-I1R1F2-ADV, Encoder expansion card (≥ Fw 3.X.X)
EXP-SENS-100-ADV, I/O Expansion card
EXP-SENS-1000-ADV, I/O Expansion card
EXP-SESC-I1R1F2-ADV (≥Fw 3.X.X) - EXP-ASC-I1R1F2-ADV (≥ Fw 6.X.2), Encoder expansion cards
GF_eXpress UserGuide
How to write the applications with the MDPlc on ADV200
KTY84-D01, temperature sensor drive interface
Modbus RTU
OPT-485-ADV, RS485 optoinsulator for point-to-point/multidrop connections
PTC-D01, PTC temperature sensor drive interface
Quick Guide for writing applications with MDPlc tool
Quick guide for using SoftScope tool (basic software and MDPLC applications)
RHF A/B, External filters to reduce grid harmonics
RHF AS/BS, External filters to reduce grid harmonics
Safe torque off function (on ADV-...-SI models)
ADV200-4, Quick Start (fw 7.X.19) + ENERGY EFF CERTIFICATE
EXP-LOCK-KIT for Expansion card
KB-ADV Remoting kit
GF_eXpress ver 2.1.39
EDS file, CANopen (for ADV200 fw 7.X.7)
EDS file, DeviceNet (for ADV200 fw ≥ 6.X.X)
GSD File, Profibus (for ADV200 fw ≥ 6.X.X)
GSDML file, Profinet (for ADV200 fw ≥ 7.0.1)
XML file, Ethercat (for ADV200 fw ≥ 5.X.X)
Application, Positioner for ADV200 fw 7.X.X
SoftScope 3, User manual (Ver.
Positioner application for ADV200 fw 7.5.16 (GF-eXpress catalog included)
Torque winder application for ADV200 fw 7.5.16 (GF-eXpress Catalog included)
1S9O02, ADV200 ver 1.X.0 (Note: need E@syDrives 2.48 or higher)
E@syDrives 2.48 (for ADV200 ver 1.X.0 and lower)
SoftScope 3, Digital Scope (Ver.


UL Certifications - ADV200_ADV200-HC_ADV200-SP_ADV200-WA, Sizes 1-2
UL Certifications - ADV200_ADV200-HC_ADV200-SP_ADV200-WA, Size 6
UL Certifications - ADV200_ADV200-HC_ADV200-SP_ADV200-WA, Size 4
UL Certifications - ADV200_ADV200-HC_ADV200-SP_ADV200-WA, Size 3
EU Conformity declaration_BUy
EU Conformity declaration_ECF1, ECF3
EU Conformity declaration_ADV200-4 (sizes 4-5-6)
EU Conformity declaration_LR3-ADV_LR3y
EU Conformity declaration_LR3
EU Conformity declaration_ADV option boards
EU Conformity declaration_LU3
Safe Torque Off Certifications - ADV200 series
Profidrive Certification no. Z30042 for: ADV200, ADV200-EH, ADV200-LC, ADV200-HO, ADV200-WA
Profinet Certification no. Z10808 for: ADV200, ADV200-EH, ADV200-LC, ADV200-HO, ADV200-WA
EU Conformity declaration_ADV200-4 (sizes 1-2-3)
UL Certifications - ADV200-EH, ADV200-SP-EH_Sizes 2-3-4-5

2D/3D Files

File 2d


File 3d


Tous les fichiers