gb
en

Main features & Overview

Overview

  • CANopen Slave- Modbus RTU Master
  • Network address from rotary switches
  • Baud Rate: 10, 20, 50, 100, 125, 250, 500 (default), 800, 1000 kBit/s
  • Internal installation

Description

The GFX4-CAN module can be installed inside GFX4/GFXTERMO4 products and expands communication by means of the CANopen protocol. The module has two communication channels:
  • the first channel is a serial port with Modbus RTU protocol, and lets you connect a maximum of four GFX4/GFXTERMO4 products including the product on which the module is installed, for a total of sixteen controlled zones (4x4)
  • the second channel is a serial port with CANopen slave protocol, and lets you connect to a CANopen Master. The node address is assigned by means of the two rotary switches (1...99) on the product that houses the module or by means of a software message. The network Master (typically a PLC) recognizes the slave node by means of this address. The slave node recognized by the Master consists of the GFX4/GFXTERMO4 that houses the module plus the GFX4/GFXTERMO4 products connected to the Modbus serial port. The expansion can be installed when the above-mentioned products are ordered or at a later date.

Downloads

Gefran product range brochure
GFX4/GFXTERMO4-CANopen datasheet
SW - PROGRAMMING AND CONFIGURATION (GPC)
SW - Programming and Configuration (GFW)
SW - Programming and Configuration (GFX4/GFXTERMO/GFX-IR)
GFW EDS FILES VER. HC01 ("HIGH PERFORMANCE")
GFX4/GFXTERMO4/GFX4IR EDS files Ver. C01 ("BRIDGE")
GFX4/GFXTERMO4/GFX4IR EDS files Ver. C02 ("BRIDGE")
GFX4/GFXTERMO4/GFX4IR EDS files Ver. C03 ("BRIDGE")
GFX4/GFXTERMO4/GFX4IR EDS files Ver. C04 ("BRIDGE")
GFX4/GFXTERMO4/GFX4IR EDS files Ver. C05
GFX4/GFXTERMO4/GFX4IR EDS files Ver. C06
GFX4/GFXTERMO4/GFX4IR EDS files Ver. HC01 ("High Performance")
GFX4/GFXTERMO4/GFX4IR EDS files Ver. HC02 (“High performance”)
GFX4/GFXTERMO4/GFX4IR EDS files Ver. HC03 (“HIGH PERFORMANCE”)
GPC EDS FILES VER. HC01 ("HIGH PERFORMANCE")