ADV200 HC

The GEFRAN ADV200 HC inverter series  offers in a unique technology solution all the basic requirements demanded by the most modern industrial hoisting systems.

The specific features, the robustness, the safety standards as well as the application flexibility makes ADV200 HC the ideal inverter to meet the operational needs of the most advanced systems.

A smarter Drive range with high performance and advanced controls, but ,at the same time simple in programming and installation.

GEFRAN, with the ADV200 HC drive offers a global control solution applied to each type of systems movement.

ADV200 HC is the universal drive: it can manage asynchronous motor with or without speed sensor (encoder) and it can control all the system movements, both hoisting and travelers (hoist, gantry, trolley).

Field-Oriented vector inverter for Hoist & Crane applications,  from 0.75kW up to 1.65MW​
* Mains supply:
- 3 x 380…480Vac, 50/60Hz (-4 models )
- 3 x 690Vac, 50/60Hz (-6 models )
- 450…750Vdc (-DC-4 models)
- 600…1120Vdc (-DC-6 models)

* Motor ratings from 0.75kW (1Hp) to 1.65MW (2200Hp)
* Certifications: CE. UL, cUL

Functions:

Motor type: asynchronous
Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification
Torque control
Simplified Start-up menu
Instantaneous Overload up to 180%
Motor, Drive and Braking resistor I2t thermal protection
100% torque at zero-speed
Braking management
Function hoist speed-up
Function Anti-Sway
Function Overtravel,
Function Anti impact
Function Master/Follower
Multispeed function (16 programmable preset)
4 independent programmable Multi-ramp
Double motor parameters setting
Joystick management
CT an VT operating mode
Memory Keypad with 5 parameters set

Options:

I/O expansion cards, configurable according to the customer's machine needs
Expansion cards for the management of auxiliary encoders
Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet, EtherCAT, Industrial Ethernet(*)
Safety Stop card in accordance with EN 954-1 (Cat.3) PL "e"
Braking resistors (standardized for the whole line)
Dedicated EMC filters (in compliance with CEE - EN61800-3:2004)
Input & Output chokes (standardized for the whole line)
OPT-485-ADV,  RS485 optoinsulator for point-to-point/multidrop connections
BUy, External Braking Unit for drives power over 55kW
AFE200 Regen Active Front End power supply unit
KB-ADV Remotable keypad kit

Features:

Regulation control modes: FOC with Speed feedback, FOC open loop, V/F
Max Output frequency 500Hz
DC Choke integrated up to 132kW
EMC Filter integrated
Dynamic Braking Module integrated up to 55kW
Heavy duty and Light duty overload management
Up to 4 options on board
Multilanguage programming software (5 languages)
Alphanumeric programming keypad
2 Bipolar Analogue Inputs  (Voltage/Current)
2 Bipolar Analogue Outputs (1: Voltage/Current, 1: Voltage)
6 Digital Inputs (PNP / NPN)
2 Digital Outputs (PNP / NPN)
2 Relay Outputs, single contact
RS485 Serial Line (Modbus RTU protocol)
Interfacing with the more common field bus: ProfiBus, CANopen, DeviceNet, EtherNet real.time GDNet, EtherCAT, Industrial Ethernet(*), ProfiNet
IP20 protection degree as standard (IP00 size 7 and parallel unit)

(*)Compatible to industry standards